When your gas boiler is about to break down, essentially the most customary signal is a banging noise. While you hear this noise, it isn't clever to ignore it. If the banging continues, the cause should be diagnosed by a qualifed boiler repair engineer, as well as any defected parts being repaired or replaced. By means of acting speedily, the cost of repairing a boiler and replacing parts can be kept low.
The banging noise more often than not happens due to air in the heating system. Most older type boilers and central heating systems, which are typically open vented, are inclined to air getting trapped which is usually the source of these noises. Air can also get trapped in more moderen boilers triggered via malfunctioning valves.
The second cause for banging noises is because of components such as the heat exchanger being scaled. (Heat travels via cracks in the scaled surface causing steam bubbles to form, resulting in loud banging sounds). Different normal factors are the boiler overheating, element failure such as the pressure vessel, automated air release valve, the high limit thermostat, and most probably, the pump.
You can reduce the risk of things like this happening by getting your boiler serviced as a minimum once a year, although ideally it is encouraged to be done twice. Regular boiler maintenance can make certain your boiler continues to run smoothly, decreasing the probability of emergency boiler repairs, which can be time consuming and high-priced. For those who don’t get your boiler serviced more reguarly, it's more probably going to break down and be high priced to repair. However if the worst happenis to happen; our expert qualified engineers will perform a boiler repair or heating repair rapidly and with minimum fuss and bother. Our engineers are trained to repair any type of gas boilers, so you could relax if you happen to ever have problems with your boiler.